China OEM Knuckle Wheel Bearing Factories - removing alternator pulley F-239808 – RNA

Short Description:

Product Detail

Product Tags

Feedback (2)

With a positive and progressive attitude to customer's curiosity, our organization repeatedly improves our products top quality to meet the wants of consumers and further focuses on safety, reliability, environmental necessities, and innovation of Hub Ball Bearings, Baut Tensioner, One Way Bearing, We are going to wholeheartedly welcome all clientele during the industry both of those at your home and overseas to cooperate hand in hand, and build a bright potential together.

China OEM Knuckle Wheel Bearing Factories - removing alternator pulley F-239808 – RNA Detail:

Parameter		Original number	Generator number	Generator number	Applicable models
SKEW	7	DB	CHRYSLER	DB	Benz Lingte
OD1	55	6421500660	04801250AA	9062700	V6 2500 3500
OD2	50	6421500360	04801250AB	6421540202	3.0L diesel oil
OAL	49.5	JEEP	04801250AC	6421540402
IVH	17	05175811AA	04801250AD	6421540802
Rotary	Right		68022877AA	A0009033222
M	M16		68022877AB	A6421540202
		INA		A6421540402
		F-239808		A6421540802
		F-239808.01

1. It has one-way slip performance, and its basic principle is similar to the one-way clutch gear on the starter

2. It can be divided into outer ring and inner ring. If the inner ring speed (i.e. rotor speed) exceeds the outer ring speed during operation, the pulley will slip immediately, and the inner ring and outer ring will be separated.

3. There is a plastic cover on the port to prevent dust from entering the interior, commonly known as dust cover.

4. Rotate directly on the rotor shaft by relying on the thread on the back. Therefore, there is no hexagon nut on the outer end face of the pulley. 5. The ordinary pulley is triangular and the one-way pulley is wedge, so that the generator has good performance in operation. 6. It must be fixed or removed with special tools: due to the particularity of the structure, the new pulley must be tightened or removed with special tools, The main part of the special tool is the mandrel matched with the teeth in the belt pulley (the outer diameter of the mandrel is 19.99mm, and the number of teeth of the mandrel is 33 teeth). 7. It must be equipped with a standard screwdriver head: (1) optional Ф 10. 12 point bit, length 70mm. (2) Optional Ф 10. 6-point bit. The length is 70mm.

Product detail pictures:

Related Product Guide:

Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs for China OEM Knuckle Wheel Bearing Factories - removing alternator pulley F-239808 – RNA , The product will supply to all over the world, such as: Ecuador, Venezuela, Macedonia, We will not only continuously introduce technical guidance of experts from both home and abroad, but also develop the new and advanced products constantly to satisfactorily meet the needs of our clients all over the world.

Alternator Decoupler