China OEM Water Cooled Alternator Factory - removing alternator pulley F-239808 – RNA

Short Description:

Product Detail

Product Tags

Feedback (2)

We usually think and practice corresponding for the change of circumstance, and grow up. We aim at the achievement of a richer mind and body as well as the living for Adjustable Tensioner, Centrifugal Pulley, As Alternator, Warmly welcome to cooperate and develop with us! we are going to continue to provide product or service with high quality and competitive rate.

China OEM Water Cooled Alternator Factory - removing alternator pulley F-239808 – RNA Detail:

Parameter		Original number	Generator number	Generator number	Applicable models
SKEW	7	DB	CHRYSLER	DB	Benz Lingte
OD1	55	6421500660	04801250AA	9062700	V6 2500 3500
OD2	50	6421500360	04801250AB	6421540202	3.0L diesel oil
OAL	49.5	JEEP	04801250AC	6421540402
IVH	17	05175811AA	04801250AD	6421540802
Rotary	Right		68022877AA	A0009033222
M	M16		68022877AB	A6421540202
		INA		A6421540402
		F-239808		A6421540802
		F-239808.01

1. It has one-way slip performance, and its basic principle is similar to the one-way clutch gear on the starter

2. It can be divided into outer ring and inner ring. If the inner ring speed (i.e. rotor speed) exceeds the outer ring speed during operation, the pulley will slip immediately, and the inner ring and outer ring will be separated.

3. There is a plastic cover on the port to prevent dust from entering the interior, commonly known as dust cover.

4. Rotate directly on the rotor shaft by relying on the thread on the back. Therefore, there is no hexagon nut on the outer end face of the pulley. 5. The ordinary pulley is triangular and the one-way pulley is wedge, so that the generator has good performance in operation. 6. It must be fixed or removed with special tools: due to the particularity of the structure, the new pulley must be tightened or removed with special tools, The main part of the special tool is the mandrel matched with the teeth in the belt pulley (the outer diameter of the mandrel is 19.99mm, and the number of teeth of the mandrel is 33 teeth). 7. It must be equipped with a standard screwdriver head: (1) optional Ф 10. 12 point bit, length 70mm. (2) Optional Ф 10. 6-point bit. The length is 70mm.

Product detail pictures:

Related Product Guide:

In order to give you convenience and enlarge our business, we also have inspectors in QC Team and assure you our best service and product for China OEM Water Cooled Alternator Factory - removing alternator pulley F-239808 – RNA , The product will supply to all over the world, such as: Ecuador, Morocco, Montreal, What You Need Is What We Pursue.We are sure our products will bring you first class quality.And now sincerely hope to promote partner friendship with you from all over the world. Let's joint hands to cooperate with mutual benefits!

Alternator Rectifier